Loggio for Integrators

Commission faster. Then leave it with the machine.

Use Loggio while you commission, then hand it to your customer as part of the machine. They get always-on, Engineer-level help on your machine without a phone call.

CUSTOMER'S OPERATOR

"Why won't this new machine start?"

LOGGIO

"The Estop next to intake conveyor 1 is showing activated, go take a look."

CUSTOMER'S MAINTENANCE

"I put it in manual and jogged the infeed, but the indexer won't move and there are no alarms."

LOGGIO

"The indexer only jogs when the safety gate is closed AND the infeed is at its home position. The infeed is currently 40mm off home, so the home proximity switch is not made. Jog the infeed back until the home light comes on, then the indexer will jog."

YOUR ENGINEER - FIELD CHANGE

"Where's the best place to add an indicator light for the vacuum pump?"

LOGGIO

"The best place to add that is PLC rung 23 in the S02_Auto_Seq routine. Wire it to RIO 2 terminal 5.4 which should be free. Don't forget that the KX-32 sensor is NPN so make sure the input card common is tied to wire 45."

LOGGIO REMEMBERS

If your customer works through a problem with Loggio, you will be able to ask Loggio about their issues and their machine directly from your Integrator Portal. (with customer approval)

ALL YOUR MACHINES AT A GLANCE

Every machine you have shipped, in one integrator portal: what each one is, what it has been asked, and what it has learned since you left the site. (with customer approval)

THE INCIDENT BUTTON

COMING SOON. Your customer pushes one button and describes the problem. Loggio explores the code, captures the relevant PLC tag values in the moment, and emails you the report automatically. You see what happened when it happened, not a week later.

LEARN FROM EVERY MACHINE

COMING SOON. Build more than one of the same machine? Loggio can aggregate what it learns across every instance in the field. (requires customer opt-in)

SEE THE STORE

Who is Loggio

Eric Moulton

FOUNDER

Eric has spent the last 20 years in Controls Engineering and AI. He's held roles from Controls Engineer for an Integrator to VP of Engineering over a three-shift Maintenance Department in high-volume manufacturing. Eric specializes in PLC programming, Robotics, and AI-Controls integrations.

Aidan SyracuseAidan leads engineering at Loggio. He holds a BS in Computer Engineering and previously built design and analytics tooling at Boeing.

Jeff SavageJeff cofounded several startups including Qatalyst Health and Monolith ICF, and he is now the Director of the Faber Entrepreneurship Center at the University of South Carolina.

Paul BrownPaul was formerly co-owner and VP over Mechanical and Process Design for REI Automation, a System Integrator which is now part of the Hahn Automation Group.